Radium Engineering

Radium RB26DETT Intake and Exhaust 12AN Male Press-Fit Fitting

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

Radium Refueling Kit Direct Mount Standard Fill

Includes a short fill neck with a scew off cap and an 8AN size vent hose. A dump can is NOT included with this kit. For use with Radium Engineering FCST fuel cells. Installation instructions...

Radium Remote Mount 1.5in Dry Break Complete Refueling Kit

Complete refueling kit includes 6 gallon fuel jug with dry break fitting, fender mounted dry break recepticle, and filler hose and fill neck. Compatible with Radium FCST fuel cells. INSTALLATION...

Radium Remote Mount Fill Neck - 24AN Elbow - 1.5in Barb

This 360 degree swiveling fill neck bolts directly on to the Radium FCST at the 6-bolt fill neck location. Hose barb elbow will accept a 1.5" inside diameter hose. One-way flapper valve is included...

Radium Remote Mount Fill Neck - Straight - 1.5in Barb

Straight fill neck for 1.5" ID fill hose. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper. INSTALLATION INSTRUCTIONS AVAILABLE AT WWW.RADIUMAUTO.COM

Radium Remote Mount Standard Fill Complete Refueling Kit

Complete kit includes 6 gallon fuel jug, fender mounted filler point, fill hose and fuel filler neck. Compatible with Radium FCST fuel cells. INSTALLATION INSTRUCTIONS AVAILABLE AT WWW.RADIUMAUTO.COM

Radium S14/S15/R33/R34 Fuel Hanger Surge Tank Add-on F90000267/274/285 or E5LM - Pumps Not Included

This kit is added to a compatible Radium Nissan fuel pump hanger to convert it to a Fuel Hanger Surge Tank (FHST). This prevents fuel starvation from occurring during aggressive driving. Installation...

Radium S14/S15/R33/R34 Fuel Hanger Surge Tank Add-on For GSS342 Or AEM 50-1200 - Pumps Not Included

This kit is added to a compatible Radium Nissan fuel pump hanger to convert it to a Fuel Hanger Surge Tank (FHST). This prevents fuel starvation from occurring during aggressive driving. Installation...

Radium SAE Fuel Level Sender 0-90 ohm 11.7in

Fuel level sender with 0 (empty) to 90 (full) ohm output. 11.7" (297mm) probe length. Compatible with all fuel types. Output is in approximately 10 ohm increments. Designed for use with Radium Fuel...

Radium SAE Fuel Level Sender 0-90 ohm 8in

Fuel level sender with 0 (empty) to 90 (full) ohm output. 8" (203mm) probe length. Compatible with all fuel types. Output is in approximately 10 ohm increments. Designed for use with Radium Fuel...

Radium Split-Flow Flex Fuel Sensor Adapter

This device allows implementing an ethanol content sensor into a high flow fuel line. The design has dual passages that the fuel can flow through, so there is no loss in fuel flow. Can be used on...

Radium Subaru 15-21 WRX/STI / 08-14 Impreza/Forester / 14-18 Forester XT Fuel Filter Mount

This mounting bracket bolts to the vehicle underside using factory mounting holes. Allows mounting of a Radium fuel filter. Filter not included. Installation instructions available at www.radiumauto...